How to Carve Stone With a Dremel – Can It Be Done and How to Do It

Carving stones is a beautiful and delicate art that requires using tools and equipment very carefully. You can use several carving tools, but the most straightforward tool of all is a Dremel. A Dremel is a rotary tool that makes every hobby and skill better by being versatile and user-friendly.

The reason why Dremel can be used to carve stone is that you can add extensions of just about any size and utility to get the result you want. In this article, let us look at how to carve stone with a Dremel to create beautiful motifs and images.

How to Carve Stone With a Dremel

Carving stones is a magnificent art that requires a lot of patience, accuracy, and creativity. Historically, the job was done with a chisel and a hammer. However, with technological advancement, art has become much more accessible as you have tools such as a Dremel that can make carving much simpler.

When you learn how to carefully use any of the Dremel tools to skillfully manipulate a stone, you can save a lot of time and energy while carving stones. Not only are the results achieved from Dremel tools much more comfortable but also more accurate and intricate. Therefore, let us see how you can use a Dremel to carve anything you want on a stone.

The Things You’ll Need to Carve Stone With a Dremel

Given below is a list of things you’ll need to have before you consider carving a stone with a Dremel.

  • A granite, sandstone, or marble stone.
  • Dremel tool with the diamond bit.
  • Safety glasses
  • Safety gloves
  • Sandpaper
  • Polishing Compound
  • Pencil
  • Alcohol
  • Workbench

Carving a Stone With a Dremel – a Step-by-Step Guide

You can buy as many tools as you like but unless you learn how to use them and master them, buying them is of no use. You can follow the given steps to create beautiful stone arts with the help of the Dremel tools.

Step 1 – Setting Up

The very first step is to get comfortable in your surroundings and set up your workbench. It is essential for you to have enough room to move around and ample light to have a clear look at your tool and stone.

This is the stage when you arrange all your tools and equipment in an accessible manner. You should be able to reach out to each tool without having to break your workflow and concentration.

We suggest that the bigger space you have, the better you will be able to work on your stone. Be sure to make your workspace look like a place you’d like to spend a lot of time in. This will keep your mind engaged on the task while giving you a reason to keep working endlessly.

Step 2 – Safety First

Carving a stone with a hammer and chisel is a dangerous task since you can hit yourself if you’re not careful. However, when you’re only learning how to carve stone with a Dremel, you need to be wary of the risks in that process as well.

While the chances of getting hurt by the stone of the tool are significantly less, you still can be seriously injured. While carving a stone with a Dremel, the stone will release a lot of dust and debris, which can fly into your eye and cause severe damage.

You should not attempt carving a stone with a Dremel without having your safety glasses on. For extra safety, you can also wear ultra-thin gloves for an added protection on your hands.

Step 3 – Figuring Out the Grain Pattern

While you’re carving a stone, it is imperative for you to know how the grain is running in the stone. To do so, you will have to rely on your touch and see how the grain feels. It is very important for you to touch and figure out how the grain is running on a stone because that determines your carving pattern as well.

You never want to carve across the grain since that leads to consequences. The grain sets a stone’s strength. Therefore, if you carve across it, you will risk breaking, splitting, or cracking it, making all your hard work go futile.

Step 4 – Sketching

This is when the real carving begins since, till now, we had only been setting up our space, the stone, and ourselves for the carving process. To start with the carving process, you will have to outline the design you want to carve on the stone.

We suggest using a pencil since it will not leave a permanent mark on the stone. You can get as detailed as you like. However, since you’re only learning how to carve stone with a Dremel, we suggest that you take it easy and draw something straightforward with the minimum outlines and intersections.

Step 5 – Burr the Outline

Throughout the carving process, the stone will be handled a lot. Moreover, it will have to be sanded and wiped with alcohol multiple times. This will surely make the pencil mark slip away. However, this outline is fundamental for you to create the entire pattern.

To make sure that your outline is always visible, you must use a pointy diamond burr to carve the outline perfectly.

Step 6 – Rubbing Alcohol

Every time you use the Dremel tool on the stone, you should rub some alcohol on it. This is to make it smooth and get rid of all debris. Rubbing alcohol on the rock also makes sure that the insides of the rock are smooth and soft. Thereby allowing for better carving.

Make sure that your hands are absolutely clean of the rubbing alcohol after you’re done since the solution can cause some serious damage to your respiratory and digestive system.

Step 7 – Start Carving

Most people believe in the wrong way. They assume the best way is to start carving with a Dremel is by beginning at the corners and slowly moving towards the center. In fact, you should always start from as close to the outlines as possible and then move away from them for the best results.

If your design involves emptying some of the stone in the middle, you should do that to define the pattern’s depth. You can use that depth as a reference to carving the rest of the stone. It is important for you to move away from the outlines slowly. That is, while carving to maintain the grain consistency and allowing you to have more energy while you’re working on the main design.

Step 8 – Sand and Polish

Once you complete your first stone carving through a Dremel, the stone might appear to be dirty and have signs of abuse. At this point, you can use a sanding tool on the Dremel and clean the entire rock perfectly. Moreover, you should add polish with a polishing compound fixed on a brush tool on the Dremel.

Once you’re done with the carving and polishing, the result will be a shining and beautifully carved rock created with a Dremel tool.

Dremel Lite 7760 Cordless Multi-Purpose Rotary Tool


Speed Range: 8,000 to 25,000 RPM
Kit Dimensions: 8.98 x 6.5 x 2.44 Inches
Weight: 9.6 Ounces
Power Source: Battery Powered
Includes: Plastic Case, Wheels, Felt Wheel, Polishing Compound, Grinding Stone, 26284S Brush Wheel, Band & Mandrel, 1/16″ Engraving Cutter, Mandrel, Wrench
Perks: Multipurpose, Quick Accessory Changes, Variable Speed, Easy Battery Charging, Portable & Lightweight, Compatible, Battery Life Indicator

Check Price

Summing Up

Taking care of your safety is of utmost importance while using a Dremel to carve stones. The flying debris can seriously injure your eyes and create a lot of trouble. Moreover, you should also have a pair of thin safety gloves. This is in case you’ll have to use the Dremel tool but too close to your fingers.

Learning how to carve stone with a Dremel is not as difficult as learning how to carve stone with a hammer and a chisel. With the right tool, Dremel model, tools, you can achieve a beautiful work of art easily.

Leave a Comment

Creative Commons License by is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Share via
Copy link
Powered by Social Snap