How to Cut a Groove in Wood with Dremel

Cutting grooves is an essential part of woodworking. However, many beginners often struggle with it. If you want to equip yourself with some knowledge of woodworking, then understanding how to use a Dremel to cut a groove in wood is often a good start. The right use of a dremel can enable you to create joinery, decorative edges and whatnot. So, this is one talent that would come in handy for a long time.

Before we look at whether a dremel can be used to cut a groove in wood, we first need to understand what’s rout. In woodwork, the rout is a hollow or you can even call it a groove that is created with power tools. And if we look at routing as a whole, then that is the name of the process that revolves around hollowing materials. Usually, if you are still a beginner, you’d want to experiment on materials that can easily be routed.

For starters, the best way to practice is with softwood, fibreboard, plastic and chipboard. Although there are a number of other options out there, these are the most common. A handheld router may also suffice if you want to rout on hardwoods. However, make sure that the movement is slow.

Now that you know enough about a groove in wood, how to cut one with a dremel? Let’s find out.

Cutting a Groove in Wood with Dremel

Cutting a groove with a dremel is not as easy of a job as some people may think. The reason behind that is a dremel is not designed for that purpose. Even then, just for the sake of it, let’s see how it’s done.

  • Browse through the range of drill bits you have with your dremel. Choose the one that is ideal for cutting.
  • Make sure to properly attach the drill bit to the dremel.
  • Clamp down the surface that you want to cut a groove on.
  • Connect the dremel to a power source.
  • Gently place the dremel on top of the surface.
  • Turn on the power and get started.

Even though it is possible, using dremel for this job should be your lowest priority. In fact, we only recommend going after this only if you have enough experience to know what you are doing.

Generally, if you ask for a professional opinion regarding this subject, then they’re heavily going to advice against the use of a dremel.

Why You Should Avoid Using a Dremel to Cut a Groove?

One of the main reasons why dremel shouldn’t be used to cut groove in wood is because it works in a rotary motion. The bits are going to kick in the surface towards the direction of the motion. And the weight of your hand and the motor are going to make it swing around the center of gravity.

This is one of the reasons why cutting a groove in wood with a dremel can turn out to be an absolute disaster.

What Equipment You Should Use?

Now that we have made it clear that a dremel is not the ideal power tool out there to cut a groove, the next thing you have to think is what to go for instead. Well, there are more than enough tools out there that can get the job done. Your top priority should be to focus on the ones that have a rotation in perpendicular, like a table saw.

Cutting a groove in wood initially might be a bit difficult to wrap your head around. However, once you get used to it, it isn’t as tricky as it sounds. Keep in mind that as long as you use the right equipment, it will be a walk in the park.

Additional Tips to Keep in Mind

There’s one thing that you must always be on the lookout for when you are doing any woodwork, and that’s personal protective equipment. Many people seem to forget how important the right equipment can truly be when you are doing woodwork. Thus, make sure that you do not miss out on it and always stay well-equipped to avoid any possible danger.

All it takes is a pair of goggles, the right gloves and of course earmuffs. The sound of cutting a groove in wood can be loud, so if you do not have earmuffs to protect your ears then you are going to have a hard time hearing afterwards.

The Bottom Line

It is without a doubt that there are numerous tools out there for woodwork. You are certainly not short on options if you want to get started with it. Most of the times though, if you want to cut groove on wood, then you should go for a tool that is meant for this purpose.

In woodwork, the better the tool you use, the better the overall results are going to be. The people who do use dremel for wood work are either highly experienced, or do not have any other option.

The best equipment you could find to cut a groove in wood is a table saw. On the other hand, if you use a dremel, then not only it might potentially take your hours, but ultimately, you wouldn’t be able to get the results you expect either.

Leave a Comment

Share via
Copy link
Powered by Social Snap