How to Cut Wide Boards with a Miter Saw

Miter Saw is, without a doubt, one of the best additions to your workshop if your work majorly revolves around cutting timber. This versatile power tool is capable of easily penetrating through the tough surface of the limber with its blade. That said, if you’re not that familiar with the Miter Saw, then there are various tips and tricks that may just help you get the result you desire.

In case if you’re a novice and don’t know much about this power tool, then a Miter Saw is used in a number of workshops to accomplish different kinds of cuts with ease. It helps in making repetitive cuts and cross-cutting the timber in no time.

The operation and the use of this Saw is pretty much straight forward. However, there’s more to it than what meets the eye. The Miter Saw, although powerful, is equally dangerous if approached without appropriate safety measures.

Therefore, before you begin your task, be sure to know all the steps you will require to finish your task. In case, if your task is Cutting the Wide Board with Miter Saw, then this guide will walk you through all the steps required to help you achieve the desired results.


Cutting a Wide Board with Miter Saw

Step 1: Know the Kind of Miter Saw You Have

Nowadays, you will mostly find three variations of Miter Saw. These variations are based on sliding, standard, and compound Miter Saw.

Sliding Miter Saws are the ones that allow you to cut wide boards with ease. In case, if you have a non-sliding saw, then your cut making efficiency will remain limited. However, with a sliding Miter Saw you can nearly double your working efficiency.

Whereas, a standard Milter Saw is more like a basic saw that helps you make angular cuts with precision and accuracy. Similarly, as mentioned above, the compound saw is another unique type of Milter Saw that can turn into both Milters and bevel.

Step 2: Measure and Mark

This step is highly crucial if you haven’t had much of an experience working with the Saw. Although experts and experienced people may skip this step, however, we’d recommend that you make this practice a habit in your workplace.

That said, make use of a marking laser, a marker, measuring tape, or any other apparatus that may help you acquire a precise reference line in this process.

Step 3: Wear Your Safety Gear

Precaution and safety measures are definitely a must! When it comes to your direct contact with tools and equipment you just cannot afford to be careless around them. Therefore, in order to keep yourself from harm’s way, here’s what you will need to do:

  1. Wear your protective gear, that is, gloves, goggles, earplugs, and face shield.
  2. Always make sure that the protective guard is in place at all times.
  3. The wood that is to be cut must firmly be in its place. It should be aligned with the fence and the table.
  4. Let the blade of your Miter Saw reach the maximum speed before you start the cutting process.
  5. Make sure that the distance of at least around 6 inches is present between your body and the equipment.
  6. Make use of a clamp to assist you with the cutting process. It can help secure the material in its place firmly.

Step 4: Make the Cut!

Finally, it comes down to the action! This goes without saying but make sure you’ve everything right in their place.

Make use of clamps to hold your wide board in its position. Clamps are going to be your best allies that will help you make the cut accurately like a pro.

So, in this step, place your wide board against the Miter Saw. While you place your board, make sure that the teeth of your Saw are directly aligned with the reference line you’ve drawn on the board. This will help you make sure that the teeth will directly penetrate the surface area that you want.

Now turn on your Miter Saw. Allow the speed of the blade to reach its maximum.

Once the speed of the blade is at its maximum, bring the Saw in contact with your Wide Board and apply force so the teeth penetrate through the surface.

And voila! There you have it, a cut through the Wide Board using your Miter Saw.


Tips that Will Help You Cut Wide Board with Miter Saw Like a Pro

Tip 1: Neat up the Ends of Your Wide Board

There’s a high chance that the Wide Board you will get will have chipped or split ends. In order to deliver a result like a pro, consider cutting off the edges by a few centimeters or as required.

Tip 2: Make Use of Stop Blocks

Having to deal with multiple blocks of wood that needs to cut at a similar length can prove to be quite a hassle. This is where stop blocks can come to our rescue.

Simply use a block of wood, measure the length you want to cut, and clamp the block in place (in accordance with the length). This will help you make a cut through multiple blocks of wood simultaneously, without an error.

Leave a Comment

Creative Commons License
Woodsybond.com by https://www.woodsybond.com is licensed under a Creative Commons Attribution-NoDerivatives 4.0 International License.
Share via
Copy link
Powered by Social Snap