How to Replace String on Greenworks Trimmer

Many people who own a lawn trimmer do not know that the string on this device tends to become brittle with sustained use. If you’ve been using your Greenworks trimmers for years, eventually, the line will need replacement so that it can keep serving you better. 

A few people claim that replacing the string on their trimmer is harder than operating the unit. Thankfully, that’s not the case. If you don’t know how to change the line on the Greenworks trimmer, we’ve made the perfect guide! 

This article will save you valuable time and effort so that you can get back to trimming your lawn. 

---

Steps to Replace String on Greenworks Trimmer 

Have you ever looked at your lawn trimmer’s user manual and it immediately resembled a jigsaw puzzle? If so, you can rest easy because we’ve made things a lot simpler for you by breaking down the entire process into easily understood bits. 

Step 1: Take Off the Trimmer Head 

First, ensure that the trimmer is switched off before taking out the head. After that, remove the trimmer’s head and expose the spool inside the Greenworks trimmer. You will discover that there are a bunch of arrows around the spool.

Next, you have to twist the head counterclockwise or clockwise. You can do this by pressing the release button which will allow the clip to unwind and also free the spool. Generally, the loosening mechanism on Greenworks trimmers works upwards. 

Removing the trimmer head is essential because it secures the string. You won’t progress from this step if you don’t take off the cap.

Step 2: Emptying the Spool 

You can empty the spool by yanking it off. You will also notice that the spool has a clarified spring inside the reel. This spring is a significant part of your reel and you should ensure that it is securely stored. 

Take out the spool without damaging the spring take care not to damage the spring setup in the process. Since a Greenworks trimmer has a pretty strong string, you’ll need to put your back into it before emptying. 

Step 3: Inserting the New String 

The most crucial step is inserting the new string. Try to wrap the piece around the spool in a straight direction for better results.  

When you drain the bolt, cut through the dryer line. The process will be easier if you let the spring face up while holding the string firmly. There is a tiny gap inside the spindle through which you can insert the new string. Try to insert the string until there is about a 6-inch allowance left. 

Once you complete this step, you have to assess the string. If the line has a snag, you have to repeat the process. 

Step 4: Check Again  

After performing all the above steps, you have to check if the string is properly aligned.  You can confirm if you’ve replaced the line correctly by firing up the trimmer and testing the new string. 

If you failed in any step, the machine will not spin the strings properly. Therefore, if you notice any glitch in the equipment, you should redo the process. Remember that a slight mistake can cost you the overall functionality of the trimmer.

---

In a Nutshell 

Fixing or replacing a string on your Greenworks trimmer is a crucial maintenance procedure. Regular maintenance allows you to save time and your trimmer will run efficiently and smoothly at all times. 

There are several reasons why the string on your Greenworks trimmer needs replacement. Normally, they tend to get brittle over time and might even break in the middle of a trimming session. 

However, after understanding how to replace string on Greenworks trimmer, you must follow the steps correctly. Luckily, this guide has outlined the process that will ensure that your equipment will remain in good working order after changing the cord.  

Lastly, get your trimmer ready to ruthlessly slash some grass!