How to Screw Into Concrete Without a Hammer Drill?

Concrete blocks have rigid surfaces and are more challenging to drill than mortar, ordinary cement, or clay bricks. You would need a hammer drill to bore through a concrete block. You might wonder, then, whether it is still possible to screw through concrete if you do not have a hammer drill.

Luckily, there are alternative methods of screwing into a concrete surface even without a hammer drill. A regular drill can still do the job perfectly and save you a lot of money in the process if you have the right tools. So, keep reading to learn how to screw into concrete without a hammer drill.

Is Drilling Into Concrete Possible Without a Hammer Drill?

The hammer drill is the perfect tool for drilling into a concrete surface. This is because the drill is robust and can easily drive a single masonry drill bit without needing a replacement or overheating the motor.

You can still penetrate concrete with a regular drill if you follow the correct procedure. However, the process won’t be as quick as when you use a hammer drill. You’ll need to combine your regular drill with appropriate masonry drill bits and multiple nails. Also, you must be dedicated to the task before successfully drilling into a concrete surface.

Keep in mind that this method should be an alternative and not your go-to solution. If you have multiple projects that require drilling into concrete, you’re better off renting or buying a hammer drill.

Why Are Hammer Drills and Masonry Drill Bits Used for Concrete?

Drill bits are your best option when dealing with concrete blocks. The risk of damage and breakage is low since the diameter at the tip of the drill bit is wide. Moreover, they are made up of tungsten carbide which suits heavy-duty tasks.

For everyday projects that involve wood or cement walls, a regular drill works perfectly. However, this is not the case with concrete which demands a significantly powerful drill.

That is why hammer drills coupled with masonry drill bits will work on a concrete surface and the combo makes the job much easier. Hammer drills ensure that the drill bits are knocked into the concrete instead of just rotating on top due to their immense power and speed.

Tips to Drill Into Concrete Without Hammer Drill

  1. Before you start the drilling process, you need to gather masonry drill bits of varying sizes. The variety is crucial since a regular drill is slightly underpowered as compared to a hammer drill.
  2. You need to start with the small-sized bits and move up to the larger ones. Additionally, avoid cheaper bits and invest in long-lasting and high-quality drill bits.
  3. Start slowly so that you avoid overheating the motor; excess heat will kill the drill. Start with a slow speed and gradually increase it as you go deeper into the concrete. You should place more focus on your drilling accuracy and efficiency than the speed.
  4. The age of your concrete will also have an impact on the drilling process. You might find it easier to drill through a newly completed concrete wall than older ones. In case you are working with aged concrete, you’ll be better served with a hammer drill.
  5. Your regular drill may overheat while working on concrete because of friction. Therefore, keep the drill bits cool by sprinkling some water at varying intervals. Additionally, avoid overworking the drill motor.
  6. If you hit any stones or hard spots inside the concrete, take out the drill and pick a larger drill bit. After widening the hole, use a hammer and large nail to remove the obstruction.

The Right Way to Drill Concrete Without Hammer Drill

Once you have your regular drill and variable-sized masonry drill bits, follow the steps outlined above to drill into concrete.

As already mentioned, you need to use masonry bits with a regular drill to create the right force that would screw into concrete. Start with smaller masonry bits with sharper tips for easier penetration into the concrete. Do not be in a hurry, and slowly apply pressure as you go.

You can gradually increase the size of the masonry bits to widen the hole. This is a time-consuming, but necessary process since a higher speed would only overheat the motor.

Moreover, you need to get rid of any obstructions while drilling instead of forcing your way through. Once you notice that the drill is no longer penetrating, you should stop the machine and get rid of the stones or obstructing objects.

It is very important to not let the motor overheat you should immediately stop as the temperatures start rising.  You can have some water by your side to cool down the drill bits.

Finally, you must be patient when using a regular drill. Remember that the regular drill is underpowered and doesn’t suit heavy-duty activities.

Bottom Line

It is undeniable that drilling into concrete is fairly difficult and requires specialized tools to fulfill. However, if you have projects involving concrete and do not have the correct drill, you could still work with your regular drill after combining it with the necessary fittings.

Our guide explains all you need to know about how to screw into concrete without a hammer drill. Even though you can perfectly drill through concrete with a traditional drill, you’re better off investing in a hammer drill for future projects.

Leave a Comment

Share via
Copy link
Powered by Social Snap