When it comes to renovations, bathrooms are often one of the most neglected parts of our house. With the excessive moisture, its overall appearance can wear off over time, especially, the area around the toilet. However, tiling areas around the bathroom sink and the toilet isn’t as simple as tiling the rest of the bathroom.
For starters, only start working on these tiles once the adhesive on the rest of the tiles is dry. Otherwise, you risk dislodging the tiles when you walk on them. With that said, if you want to avoid the hassle and DIY the job of tiling around a toilet, then don’t worry as this guide has got you covered.
Here Are the Step by Step Instructions to Tile Around a Toilet:
Step 1: Paper Template
First, to determine the size of the tiles you need, create a paper template. Place the paper template around the area where you want to install your tile. Mark the area and then cut the piece of paper the same size as your tiles. Make sure that you leave a 5-millimetre grout gap and also, keep the paper template 5 or 10 millimetres wide and slightly longer than the obstructions.
Step 2: Mark the Tile
Place the paper template you have created on top of the tile. Mark the shape with a pencil or pen. Grab a tile scratcher to start scratching over the line. This will make it easier for you to cut the tile cleanly. Keep in mind that using personal protective equipment such as a glove and a mask while cutting the tile is always a good idea.
Use a tile nipper or an angle grinder, or any other tool that you think maybe feasible to start chipping or cutting the tile until you get the desired shape. Make sure that once you’re near your mark, the cuts are smaller. The last thing you would want is to cut the tile more than the measurement.
Step 3: Smoothen the Edge
Once you’ve chipped the tile to the desired shape, you now need a tile filer or sandpaper. Smoothen the tile as much as possible with it. After that, clean it with a wet cloth and make sure to remove all the dirt and splinters from it.
Step 4: Check the Tile
Now check whether the tile properly fits the pedestal or not. If it does, then you’ve successfully finished the better half of the job. Because now all you need is to get your hands on the adhesive.
Step 5: Apply the Adhesive
Pick a high-quality tile adhesive and apply it to the tiles. Make sure that you place the tiles gently into the desired area so the adhesive does not spread around on other tiles. Once done, apply some pressure and wait for it to dry.
While the adhesive is drying, do not use the toilet or your bathroom. Moisture and exposure to water can cause the bond to weaken. After that, you can fill the grout if you want to and enjoy your newly installed neat and tidy tiles.
What Tiling the Bathroom Can Do for You?
1) Increase Aesthetic Appeal
Installing new tiles into your bathroom can make a major difference in the overall aesthetic appeal of your house. After all, we visit the bathroom multiple times throughout the day and renovating the bathroom should also be included in your priority list.
2) House Value
If the idea of aesthetic appeal does not grab your attention, then the effects a newly tiled bathroom will have on the value of your house might do so. That’s right, a newly tiled bathroom can significantly increase the value of your house. So if you are planning to sell your home, then it can be a great investment.
3) Avoiding Injuries
Older tiles do not only lose their shine and appeal but also, become more slippery. Thus, if you want to keep yourself and your loved ones safe from injuries, then opting for quality tiles can be the best way to do so.
When you take into account that bathroom tile installation can easily be turned into a DIY project, it is worth the time. Professionals often charge a lot of money, so without too much of a hassle, if you have the right equipment, you can install the tiles yourself in no time.
The Bottom Line
Replacing the tiles around a toilet isn’t as hard as it seems. So if you want to get the job done, then you do not have to hire professionals. Just follow the steps we’ve mentioned above and in no time, you will be enjoying a neat and clean bathroom with newly installed tiles.