What is a Dual Bevel Miter Saw?

Choosing the right tool that complements the task you want to get done sometime gets annoying. With numerous types of saws available in the market, one can easily get confused about what they actually want. A saw, a miter saw, a single bevel miter saw and then a dual bevel miter saw; this cluster of variety can leave you scratching your head.

A miter (or mitre) saw typically is used to make crosscuts on various angles with precision. The saw has a blade mounted on top that swings left to right to yield projected cuts.

Now, what is the difference between a single and dual bevel miter saw?

A single bevel miter saw can bevel only one direction at a time: left or right. For the other side of the board, you have to flip the workpiece.

On contrary, a dual bevel miter saw can swing the blade simultaneously in both directions. This versatility makes your task easier by getting all things done at once.

This article will end your search to find all facts essential before buying a dual miter saw. If you want to know “why should I buy dual bevel miter saw” and “why should I prefer it over single bevel miter saw”, this guide will help to find you the answer.

What Exactly are Bevel Cuts?

For newbies, this can be a question one might ask for clear understanding. For veterans, let’s check how much you know about the cuts your saw can make.

A miter saw can make four different types of cut. Crosscuts are the 90° angle cuts. This can be used in reducing the size of long wood pieces.

However, miter cuts are the typical 45° angle cuts. They are the cuts along a desired angle of the board. The one you observe at top corners of the door casing.

Bevel cuts, in comparison, can have any angle other than 90°. They are the cuts through the thickness of the board. The one you will observe at doorstops.

Compounds cuts are the one in which miter and bevel cuts are combined. You can practically examine this in crown molding used on top of the interior walls.

Dual-Bevel Miter Saw

The dual bevel miter saw is like an all-rounder. Its dual-direction cutting feature can save you time by getting the task done in a single round.

Also, getting your bevel cuts on the perfect angle can be challenging. Rather than twisting the board to bevel the other side, you can simply do the task in one run. In addition, this flipping also displaces your board which may result in missing the right angle.

Application of Bevel Cuts

For a genuine craftsman, a dual bevel miter saw will be an optimal choice. These bevel cuts are critically required during crown molding tasks. Also, your handcrafted trims can’t attain that sleekness without on-point cuts.

Plus, getting that on-point precision seems nearly impossible sometimes. You lag in the angle game while playing flip the board with a simple miter saw.

Consequently, for all the detailing and intricacies, a dual bevel miter saw is surely required.

How to Use Dual Bevel Miter Saw

Buying a dual bevel miter saw can ease your task. But without any clear knowledge about operating the saw, you may further muddy the waters.

To get you out of the woods, here is a simple tutorial:

Step 1: Grab the Safety Equipment

Your task involves sawdust, blades and electricity. Safety measures must be taken seriously. Wear a face or nose mask to prevent sawdust. Wear gloves and shoes to prevent serious health injuries.

Manufacturer’s recommended precautions must be taken. Slide your miter saw or mount the miter box, as per the available options.

Step 2: Time to Check Efficiency

Working directly on the actual work piece can be a bit risky. Your machine can malfunction or maybe you can run it in a wrong way.

For perfection, grab an old piece of wood and practise on it first.

Step 3: Draw an Outline (Optional)

For the sake of precision, we suggest you outline the required angles at the work piece before trimming.

But if you are confident enough, then jump-start the work by Step 4.

Step 4: Set the Geometry

The position of your miter saw must be vertical. It is an optimum angle to bring maximum efficiency with minimum perils.

Once done, bring the outlined board and adjust the outline right above the blade.

Step 5: Time to Start

Start the machine and slowly bring the board toward the riving knife. Fine compound cuts can result only if you act after analysing every minute.

Step 6: Final Touch

If your piece after cutting is lacking the lustre and smoothness, bring in the sandpaper. It will yield you the flawless results.

And that’s it, you are done!

Why You Should Buy a Dual Bevel Miter Saw

Here is why you should plan to buy a compound miter saw:

  • Lends you an area for creativity. Can be a favourite tool of craftsmen and artisans.
  • Best for making intricate custom trims.
  • Best for making critical crown moldings.
  • Saves your time by removing the need to flip board. The swinging fulcrum of this compound saw will do the task on the counterpart concurrently.
  • Excellent precision as the board is not displaced until the task is done. With no need for rearrangement, the area for error making is limited.

However, compound cuts are not what a newbie can do. It requires special care and efficiency to make a dual bevel miter run productively. On the contrary, a single bevel miter saw is simpler to run.

Why You Should not Buy a Dual Bevel Miter Saw

With a bunch of pros, there are some cons as well:

  • Highly expensive. The product might cost you double of what a single bevel miter saw costs.
  • It might weigh heavier than a single bevel miter saw.

Although a dual bevel miter saw is expensive, the features added in it can benefit the user in numerous ways. So, all the money paid comes back in the shape of productivity.

Find the Right Miter Saw

Searching for the right type of miter saw that goes along with your task can be confusing. Here’s what you should know before buying a miter saw:

1. Know the Difference

As discussed before, miter saw can come in various types. You can find:

Basic miter saw: They are used to do simple jobs like miter cuts. They have limited areas for creativity. But bevel cuts are not what you can do with this type of saw.

Compound miter saw: They allow you to make bevel cuts as well as miter cuts. A compound miter saw is yet the best available option for complex bevel cuts.

Sliding compound miter saw: Just like a compound miter saw they will allow both miter and bevel cuts. The only difference is that it has a sliding arm. The sliding feature, though requires special care, can assist to cut wider pieces of wood.

2. Make the Right Choice

Once you have analysed your task, you will have a clear picture of what you want. For innovative minds, a dual bevel miter saw will be the best choice. It can cost more but the versatility provided is worth a try.

However, if you want to do simple tasks then buying a dual bevel miter saw will be a waste of money. A simple miter saw can do the job for you.

Some other features must also be considered before buying:

  • Check whether your machine comes with a dust collection system or not. Otherwise, you might end with piles of dust around.
  • For accuracy, check the laser guide which will lead you to make precise bevel cuts.
  • Check the blade that comes with your machine, as it can both make or ruin your day.
  • Make sure to check what type of safety measures the manufacturers are providing.


A dual bevel miter saw is all you need for intricacy and delicacy. With compound cuts, you can give your work piece slanting trims with perfection. Also, the ease offered by cutting both sides at once makes it worth buying even if it costs more than conventional miter saws.

Leave a Comment

Share via
Copy link
Powered by Social Snap